How to run a task using API - VisualCron

andyfordyce
No customer Topic Starter

14 years ago

I have attempted to use your API (4.9.40) to execute a remote task. I can succesfully run a Job but when it comes to running tasks it doesnt appear work. The jobid and taskid used are are correct. Any ideas?

Server s = new Server();
Client c = new Client();
Connection conn = new Connection();
conn.Address = "testserver";
conn.UserName = "admin";
conn.PassWord = "";
conn.Port = 16444;
conn.ConnectionType = Connection.ConnectionT.Remote;

try
{
s = c.Connect(conn, true);
}
catch (VisualCronAPI.Client.ClientLoginFailedException ex)
{
Console.WriteLine(ex.Message);
}

s.Jobs.Tasks.Run("eecd5322-5831-4ad3-bd8e-23e21cf7ee6e", "9702725a-001c-43ab-a45c-1de45353b279";

Edited by moderator 14 years ago | Reason: Not specified

ErikC
Free support

14 years ago

#2

andyfordyce wrote:
s.Jobs.Tasks.Run("eecd5322-5831-4ad3-bd8e-23e21cf7ee6e", "9702725a-001c-43ab-a45c-1de45353b279";

I think you miss the ')' behind this line.

s.Jobs.Tasks.Run("eecd5322-5831-4ad3-bd8e-23e21cf7ee6e", "9702725a-001c-43ab-a45c-1de45353b279");

Regards,
Erik

Uses Visualcron since 2006.

andyfordyce
No customer Topic Starter

14 years ago

#3

Damn, I must have accidently deleted it when pasting the code into the post. This doesn’t appear to be my issue, any other ideas?

Thanks

ErikC
Free support

14 years ago

#4

Hi andyfordyce,

I moved this topic to the API section.

I looked at your issue and it looks like you are missing a third parameter which should the boolean: bolCheckConditions.

Here are the parameters when you're using the guids for the job and task:

string jobId, string taskId, bool bolCheckConditions

Regards,
Erik

Uses Visualcron since 2006.

andyfordyce
No customer Topic Starter

14 years ago

#5

Hi

I have taken a further look at this and the run method is only accepting 2 arguments and not 3. Are you possibly using a different version of the API? I have also downloaded the API documentation from the VC website and there is no mention of the run method accepting 3 arguments.

Run(TaskClass)
Run(JobClass, TaskClass)
Run(String, String)

Any help on this is much appreciated.

Thanks

ErikC
Free support

14 years ago

#6

Hi,

I'm using the latest version 5.7.4 of VC.
I'm not sure of the API version in here.

I see you can use the jobclass and the taskclass.
Can you make two objects for the bob and the task and provide them in the run method?

If both objects are good (job and task) the run method should work.
Did you tried this?

Regards
Erik

Uses Visualcron since 2006.

Martin.Lanza
No customer

14 years ago

#7

I haven't tried to run jobs/tasks by their ID

If you iterate the Jobs and Tasks to find your specific Job and/or Task,
then pass the Job object or Task object into the appropriate run method
it works for Jobs but not for tasks (same problem as Andy - version 4.9.40)

There must be a bug in the API
but there must be a work around as the VC client is able run a task directly

Edited by user 14 years ago | Reason: Not specified

ErikC
Free support

14 years ago

#8

Hi,

I tried it this morning with VC version 5.7.4.
I did manage to get a task running with the two string id's, but I wasn't able to reproduce it. Looks like the code I wrote worked only once... 😕

I also made two objects, one for the job, one for the task. I used the Get method with the id for this to get both objects.
By using these two in the run method it did not work also.

So I have the same conclusion as MArtin.Lanza: there must be a bug here.

Regards,
Erik

Uses Visualcron since 2006.

Support
Official support

14 years ago

#9

Newer versions require 3rd parameter to tell if it should run the Task with Conditions or not.

I can't tell right now if there is a specific problem in 4.9.40 but I do know that a lot have happened in the API since then.

We used the sample from the TestClient in the API folder and added this method:

Quote:

private void btnRunTask_Click(object sender, EventArgs e)
{
if (s != null)
{
if (s.Connected)
{
// loop through all existing Jobs
foreach (JobClass j in s.Jobs.GetAll())
{
// find one Job with at least one Task
if (j.Tasks.Count > 0)
{
AddToLog("Trying to run Task: " + j.Tasks[0].Name + " (" +j.Tasks[0].Id + ")");
// run Task and exit loop
s.Jobs.Tasks.Run(j.Id, j.Tasks[0].Id, false);
break;
}
}
}
}
}

This works every time for us. An interesting detail is that the overload method that takes two Id (Job and Task id) is used by the other "Run" methods. So, if that does not work and the other two works then you are sending the wrong Id's.

Please try the above method to confirm.

Henrik
Support
http://www.visualcron.com
Please like VisualCron on facebook!

ErikC
Free support

14 years ago

#10

Hi support,

I used the third parameter and I'm not able to run the task...

JobClass jo = new JobClass();
jo = s.Jobs.Get("33f100d2-0e6d-4524-b64e-49d17d3e8287");
TaskClass ta = new TaskClass();
ta = s.Jobs.Tasks.Get("5c28384e-edaf-4156-818c-77c4764d02d5");
s.Jobs.Tasks.Run(jo, ta, false);

If I use these commands I can change the activate flag:

s.Jobs.DeActivate(jo);
s.Jobs.Tasks.DeActivate(ta);

So I know the ID's are ok. Still I'm not able to run the task.

The code is ok, there are no errors.

Regards
Erik

Edited by user 14 years ago | Reason: Not specified

Uses Visualcron since 2006.

Support
Official support

14 years ago

#11

The log file should probably show something about this. Could you check log_serverDATE.txt. If that does not contain _anything_ about this then we would like to see the log file from the api. You can find the location of that by opening the client->Manage client settings->Folders->Log. Close the client when you do the testing.

Henrik
Support
http://www.visualcron.com
Please like VisualCron on facebook!

ErikC
Free support

14 years ago

#12

Hi,

I looked at my logfiles, and the log_server20110516.txt is showing:

5/16/2011 12:49:05 PM	Debug	TcpClient accepted.
5/16/2011 12:49:05 PM	Debug	Before sending ClientConnection.
5/16/2011 12:49:05 PM	Debug	Before returning sslStream
5/16/2011 12:49:05 PM	Debug	New client connected.
5/16/2011 12:49:05 PM	Debug	Client: 5942572d-2879-4356-bc58-ba2eabdabd97 (10.5.107.16) has disconnected
5/16/2011 12:49:05 PM	Debug	AuthenticateAsServer, certificate name: CN=vc
5/16/2011 12:49:05 PM	Debug	Removed handlers for connection.
5/16/2011 12:49:05 PM	Debug	AuthenticateAsServer doneCN=vc
5/16/2011 12:49:05 PM	Debug	Entering RemoveConnection.
5/16/2011 12:49:05 PM	Debug	Waiting for client connection
5/16/2011 12:49:05 PM	Debug	ConnClass picked up.
5/16/2011 12:49:05 PM	Debug	ConnClass deactivated.
5/16/2011 12:49:05 PM	Debug	Connection removed from dictionary.
5/16/2011 12:49:05 PM	Debug	Before sending ClientConnection.
5/16/2011 12:49:05 PM	Debug	Connection: 5942572d-2879-4356-bc58-ba2eabdabd97 was removed
5/16/2011 12:49:06 PM	Debug	Using normal logon (False)
5/16/2011 12:49:06 PM	Info	User "VisualCron Default Admin" (admin) - Logged in succesfully through Socket (05465016-fb2f-4e61-a731-71ff564aafe6)
5/16/2011 12:49:06 PM	Debug	Updating login status for: 05465016-fb2f-4e61-a731-71ff564aafe6
5/16/2011 12:49:06 PM	Debug	Before sending ClientConnection.
5/16/2011 12:49:07 PM	Comm	IN: SERVERSETTINGSREQ
5/16/2011 12:49:07 PM	Comm	IN: LICENSEREQ

The log_api20110516.txt doesn't contain any logs for this action and is not touched by my process.

So I can't see anything about my Run method.

---

If I do it again and also have the DeAvtivate statement in there I have this log:

5/16/2011 12:53:18 PM	Debug	TcpClient accepted.
5/16/2011 12:53:18 PM	Debug	Before sending ClientConnection.
5/16/2011 12:53:18 PM	Debug	Before returning sslStream
5/16/2011 12:53:18 PM	Debug	New client connected.
5/16/2011 12:53:18 PM	Debug	AuthenticateAsServer, certificate name: CN=vc
5/16/2011 12:53:18 PM	Debug	AuthenticateAsServer doneCN=vc
5/16/2011 12:53:18 PM	Debug	Waiting for client connection
5/16/2011 12:53:20 PM	Debug	Using normal logon (False)
5/16/2011 12:53:20 PM	Info	User "VisualCron Default Admin" (admin) - Logged in succesfully through Socket (28d57137-2330-4879-aa03-c1a97293b735)
5/16/2011 12:53:20 PM	Debug	Updating login status for: 28d57137-2330-4879-aa03-c1a97293b735
5/16/2011 12:53:20 PM	Debug	Before sending ClientConnection.
5/16/2011 12:53:20 PM	Comm	IN: SERVERSETTINGSREQ
5/16/2011 12:53:20 PM	Comm	IN: LICENSEREQ
5/16/2011 12:53:22 PM	Debug	Job (74) was added to processlist: _erik test
5/16/2011 12:53:22 PM	Debug	Task (82) was added to processlist: download file
5/16/2011 12:53:22 PM	Info	User "VisualCron Default Admin" - Set task state to: False
5/16/2011 12:53:22 PM	Info	Task started: download file (82)
5/16/2011 12:53:22 PM	Debug	Executing HTTP with parameters:
5/16/2011 12:53:28 PM	Info	Task completed: download file (82)
5/16/2011 12:53:28 PM	Debug	Setting previous task in TaskProcessCompleted: download file (5c28384e-edaf-4156-818c-77c4764d02d5) in job: _erik test
5/16/2011 12:53:28 PM	Debug	Process status - About to SendTaskProcess (82)
5/16/2011 12:53:28 PM	Debug	Process status - About to RemoveTaskProcess (82)
5/16/2011 12:53:28 PM	Debug	Client: 28d57137-2330-4879-aa03-c1a97293b735 (10.5.107.16) has disconnected
5/16/2011 12:53:28 PM	Debug	Task (82) was removed from processlist: download file
5/16/2011 12:53:28 PM	Debug	Removed handlers for connection.
5/16/2011 12:53:28 PM	Debug	Entering RemoveConnection.
5/16/2011 12:53:28 PM	Debug	ConnClass picked up.
5/16/2011 12:53:28 PM	Debug	ConnClass deactivated.
5/16/2011 12:53:28 PM	Debug	Connection removed from dictionary.
5/16/2011 12:53:28 PM	Debug	Before sending ClientConnection.
5/16/2011 12:53:28 PM	Debug	Connection: 28d57137-2330-4879-aa03-c1a97293b735 was removed
5/16/2011 12:53:28 PM	Debug	Job (74) was removed from processlist: _erik test
5/16/2011 12:53:28 PM	Debug	Next execution (2) for job '_erik test' is: 12:00:00 AM
5/16/2011 12:53:28 PM	Info	Job completed: _erik test
5/16/2011 12:53:28 PM	Debug	Saving Jobs

Now it did work... 😕

---

Again and now use the Activate statement after the task run:

5/16/2011 12:56:27 PM	Debug	TcpClient accepted.
5/16/2011 12:56:27 PM	Debug	Before sending ClientConnection.
5/16/2011 12:56:27 PM	Debug	Entering RemoveConnection.
5/16/2011 12:56:27 PM	Debug	ConnClass picked up.
5/16/2011 12:56:27 PM	Debug	ConnClass deactivated.
5/16/2011 12:56:27 PM	Debug	Connection removed from dictionary.
5/16/2011 12:56:27 PM	Debug	Before sending ClientConnection.
5/16/2011 12:56:27 PM	Debug	Connection: e8d9186c-9358-48a2-ba4a-2438745ad9de was removed
5/16/2011 12:56:27 PM	Debug	Before returning sslStream
5/16/2011 12:56:27 PM	Debug	New client connected.
5/16/2011 12:56:27 PM	Debug	AuthenticateAsServer, certificate name: CN=vc
5/16/2011 12:56:27 PM	Debug	AuthenticateAsServer doneCN=vc
5/16/2011 12:56:27 PM	Debug	Waiting for client connection
5/16/2011 12:56:29 PM	Debug	Using normal logon (False)
5/16/2011 12:56:29 PM	Info	User "VisualCron Default Admin" (admin) - Logged in succesfully through Socket (005257fb-ecb0-416f-8177-b3a9c188463c)
5/16/2011 12:56:29 PM	Debug	Updating login status for: 005257fb-ecb0-416f-8177-b3a9c188463c
5/16/2011 12:56:29 PM	Debug	Before sending ClientConnection.
5/16/2011 12:56:29 PM	Comm	IN: SERVERSETTINGSREQ
5/16/2011 12:56:30 PM	Comm	IN: LICENSEREQ
5/16/2011 12:56:32 PM	Debug	Job (75) was added to processlist: _erik test
5/16/2011 12:56:32 PM	Debug	Task (83) was added to processlist: download file
5/16/2011 12:56:32 PM	Info	User "VisualCron Default Admin" - Set task state to: True
5/16/2011 12:56:32 PM	Info	Task started: download file (83)
5/16/2011 12:56:32 PM	Debug	Executing HTTP with parameters:
5/16/2011 12:56:37 PM	Info	Task completed: download file (83)
5/16/2011 12:56:37 PM	Debug	Setting previous task in TaskProcessCompleted: download file (5c28384e-edaf-4156-818c-77c4764d02d5) in job: _erik test
5/16/2011 12:56:37 PM	Debug	Process status - About to SendTaskProcess (83)
5/16/2011 12:56:37 PM	Debug	Process status - About to RemoveTaskProcess (83)
5/16/2011 12:56:37 PM	Debug	Client: 005257fb-ecb0-416f-8177-b3a9c188463c (10.5.107.16) has disconnected
5/16/2011 12:56:37 PM	Debug	Task (83) was removed from processlist: download file
5/16/2011 12:56:37 PM	Debug	Removed handlers for connection.
5/16/2011 12:56:37 PM	Debug	Entering RemoveConnection.
5/16/2011 12:56:37 PM	Debug	ConnClass picked up.
5/16/2011 12:56:37 PM	Debug	ConnClass deactivated.
5/16/2011 12:56:37 PM	Debug	Connection removed from dictionary.
5/16/2011 12:56:37 PM	Debug	Before sending ClientConnection.
5/16/2011 12:56:37 PM	Debug	Connection: 005257fb-ecb0-416f-8177-b3a9c188463c was removed
5/16/2011 12:56:37 PM	Debug	Job (75) was removed from processlist: _erik test
5/16/2011 12:56:37 PM	Debug	Next execution (2) for job '_erik test' is: 12:00:00 AM
5/16/2011 12:56:37 PM	Info	Job completed: _erik test

Again a hit!

---

Now a test without the devativate or activate in there:

5/16/2011 12:58:36 PM	Debug	TcpClient accepted.
5/16/2011 12:58:36 PM	Debug	Before sending ClientConnection.
5/16/2011 12:58:36 PM	Debug	Before returning sslStream
5/16/2011 12:58:36 PM	Debug	New client connected.
5/16/2011 12:58:36 PM	Debug	AuthenticateAsServer, certificate name: CN=vc
5/16/2011 12:58:36 PM	Debug	AuthenticateAsServer doneCN=vc
5/16/2011 12:58:36 PM	Debug	Waiting for client connection
5/16/2011 12:58:37 PM	Debug	Using normal logon (False)
5/16/2011 12:58:37 PM	Info	User "VisualCron Default Admin" (admin) - Logged in succesfully through Socket (a05d97ae-ee3f-4dec-821d-773e89e71a14)
5/16/2011 12:58:37 PM	Debug	Updating login status for: a05d97ae-ee3f-4dec-821d-773e89e71a14
5/16/2011 12:58:37 PM	Debug	Before sending ClientConnection.
5/16/2011 12:58:38 PM	Comm	IN: SERVERSETTINGSREQ
5/16/2011 12:58:38 PM	Comm	IN: LICENSEREQ

Now my task isn't running anymore... donno why I have to put in an extra command to make it work.

Regards
Erik

N.B.
The client settings containing the log folder only contains the log_apiDATE.txt.
The log_serverDATA.txt is in the application installation log folder.

Uses Visualcron since 2006.

Support
Official support

14 years ago

#13

Some questions:

1. does it work when you do it locally instead of remotely?
2. when you connect, do you use set the sync parameter to "true"
3. if you wait some seconds after connecting before trying to run - does it work then?
4. does it make any difference if you turn of compression on remote connection?

Edited by user 14 years ago | Reason: Not specified

Henrik
Support
http://www.visualcron.com
Please like VisualCron on facebook!

ErikC
Free support

14 years ago

#14

1. If I do it locally, it works fine. (ConnectionType = Connection.ConnectionT.Local;) and running the app from the VC server.
2. Yes, I use the synchronizeServerObjects set to true during connect.
3. If I use the System.Threading.Thread.Sleep(5000) to wait for 5 seconds after connecting, my task isn't started.
4. If I set the UseCompression to false, my task isn't started.

Hope I can help with these answers.

Regards,
Erik

Uses Visualcron since 2006.

Support
Official support

14 years ago

#15

Took some time to debug this. The problem is that the Run method is not synchrous. So, if you are trying to run from a console app it is likely that the app exits before the message has been sent.

Preferably, we would make this method synchrous but we don't have time right now.

What you can do instead is to add an handler to TaskStarted event and exit when the Task has been started. I have a VB.NET example but you may also want to check that it was this particular Task that failed.

I am attaching the whole project.

Henrik
Support
http://www.visualcron.com
Please like VisualCron on facebook!

Martin.Lanza
No customer

14 years ago

#16

Right, that explains it

I have implemented checking for the task status/state to change and this is working very well

Thankyou very much support...

Case closed...

ErikC
Free support

14 years ago

#17

Hi,

Today I also tested this VB implementation in C#.

Here is my code:

using VisualCron;
using VisualCronAPI;

namespace GetJobResult
{
    class Program
    {
        static bool TaskStarted = false;
        static Server s = new Server();

        static void Main(string[] args)
        {
            Client c = new Client();
            c.LogToFile = true;

            Connection conn = new Connection();
            conn.UserName = "admin";
            conn.PassWord = "";
            conn.Port = 16444;
            conn.Address = "visualcronserver";
            conn.ConnectionType = Connection.ConnectionT.Remote;

            try
            {
                s = c.Connect(conn, true);
            }
            catch (Client.ClientLoginFailedException ex)
            {
                Console.WriteLine(string.Format("\nError:\n{0}", ex.Message));
                return;
            }

            s.Processes.TaskProcessStarted += new Processes.DelegateTaskProcessStarted(Processes_TaskProcessStarted);
            s.Processes.TaskProcessEnded += new Processes.DelegateTaskProcessEnded(Processes_TaskProcessEnded);

            TaskClass ta = new TaskClass();
            ta = s.Jobs.Tasks.Get("5c28384e-edaf-4156-818c-77c4764d02d5");
            s.Jobs.Tasks.Run(ta, false);

            while (!TaskStarted)
            {
                System.Threading.Thread.Sleep(100);
            }

            c.Disconnect(s);
        }

        static void Processes_TaskProcessEnded(ref Server server, VCTaskProcessClass pc)
        {
            TaskClass tc = s.Jobs.Tasks.Get(pc.TaskId);
            Console.WriteLine(tc.Name + " was ended.");
        }

        static void Processes_TaskProcessStarted(ref Server server, VCTaskProcessClass pc)
        {
            TaskClass tc = s.Jobs.Tasks.Get(pc.TaskId);
            Console.WriteLine(tc.Name + " was started.");
            TaskStarted = true;
        }
    }
}

This code works fine and the task runs everytime.
I find it scary though to use the while loop here, it could be an infinite loop...

Regards,
Erik

Uses Visualcron since 2006.

Support
Official support

14 years ago

#18

Nice, looks like my code 😎

Henrik
Support
http://www.visualcron.com
Please like VisualCron on facebook!

Please note that VisualCron support is not actively monitoring this community forum. Please use our contact page for contacting the VisualCron support directly.

Login